east enterprises

Developed as the top-of-the-line models of the dependable, heavy-duty PENTAX WG series, WG-3 offers the series' best waterproof performance (down to 14 meters underwater) and shock resistance (against a fall from a height of two meters). It also features a newly designed, large-aperture, four-times optical zoom lens (with the maximum aperture of F2.0 at wide-angle end), a high-sensitivity, back-illuminated CMOS image sensor, and a new-generation imaging engine to deliver high-quality, low-noise images — even in the water, at night and indoors where the subject is poorly illuminated. Adding such outstanding features as –10°C cold resistance, dual shake reduction system, Full HD movie recording (1920 x 1080n pixels) and a high-performance, wide-frame 3.0-inch LCD monitor, the WG-3 performs dependably and brilliantly in a wide variety of demanding outdoor scenes.

 

The PENTAX MX-1 features a four-times optical zoom lens offering a large maximum aperture of F1.8 to F2.5 and a 28mm wide-angle coverage (in the 35mm format). The camera's high performance ensures sharp, well-defined images. Even when the zoom lens is set at maximum aperture and the widest angle of view, the photographer can use faster shutter speeds in dimly lit locations and take advantage of a beautiful bokeh (out-of-focus) effect in the background. The MX-1 also provides a 1cm Macro mode to capture dramatic close-up images of a subject from just one centimetre away. The Intelligent Zoom function extends the zoom coverage up to approximately 7.8 times (for a focal length of approximately 218mm in the 35mm format) without compromising image quality.

The MX-1 incorporates a newly designed back-illuminated CMOS image sensor. With a top sensitivity of ISO 12,800 and approximately 12.0 effective megapixels, it boasts remarkable high-sensitivity, low-noise characteristics and assures high-speed image data readout to deliver super-high-resolution images. The MX-1 also features a state-of-the-art imaging engine. Supported by the latest Super Resolution technology, this engine offers outstanding image-processing performance to produce clear, high-quality images with well-defined details. In addition, its unique Handheld Night snap mode helps the photographer capture blur-free night-time images by taking multiple images at one time, then synthesizing them into a single composite picture.

With its textured-rubber grip, and brass top and bottom panels that develop a distinctive appearance after years of use, the MX-1 offers a classic design reminiscent of traditional film cameras. It also features a number of metallic parts, including the lens ring, to complete the tasteful, high-class finish.

Thanks to a dedicated exposure compensation dial, the MX-1 assures user-friendly, direct-access to the exposure compensation setting without the need to access the menu screen. It also features a mode dial for swift, effortless setting of 10 different shooting modes — ranging from the hands-off Auto Picture and the all-purpose Programmed AE, to the more creative Aperture-priority AE, Shutter-priority AE and Metered Manual. As a result, the photographer is assured of outstanding creative freedom to choose the most appropriate shooting mode for a particular scene or subject without delay. What's more, the MX-1 comes equipped with a host of SLR-standard features to optimize its operability, including advanced user interface functions, easy-to-access controls and in-body RAW data development.

The MX-1's dual shake-reduction system couples the PENTAX developed sensor-shift SR (Shake Reduction) mechanism with a digital SR mode to more effectively compensate for annoying camera shake. This hybrid system assures the photographer of sharp, blur-free images even under demanding shooting conditions prone to camera shake, such as; when using a telephoto lens, shooting with incidental light in poorly lit locations, or photographing sunset scenes.

The MX-1 comes equipped with a large 3.0-inch, high-definition LCD screen with approximately 920,000 dots. Its tilt-able design allows the photographer to adjust the monitor up and down and set it at the angle easiest for viewing. It also provides a clear view of images and menus displayed on the screen to assure a quick, effortless check of recorded images and swift, easy setting changes.

Since the MX-1 features the Full HD movie recording function, employing the H.264 recording format, the user can capture high-quality movie clips (with 1920 x 1080 pixels, at a 16:9 aspect ratio, and at a frame rate of 30 frames per second). It provides a dedicated movie recording button on its top panel to instantly start recording a movie from any shooting mode. It even offers creative movie capture modes — including a High-speed Movie mode* for slow-motion playback and Time-lapse Movie mode* for fast-forward playback — to make movie viewing more fun and exciting. A micro-HDMI terminal (Type D) is also provided on the camera body for the output of recorded movies and sound to external devices.
* In these modes, the recorded size is fixed at VGA dimensions (640 x 480 pixels).

1.Pop-up auto flash
2.Remote control sensors on front and back panels
3.Dual-axial digital level for accurate horizontal and vertical alignment
4.15 digital filters, including Miniature and Toy Camera, to add creative touches to captured images
5.A range of creative image-processing tools including Stretch and Small Face filters and Collage function
6.A choice of four aspect ratios (4:3, 16:9. 3:2, 1:1) to accommodate specific applications
7.SILKYPIX Developer Studio 3.0 LE for PENTAX RICOH IMAGING RAW data development software (designed by Ichikawa Soft Laboratory) included, in addition to in-body RAW data development
8.Compatibility with Eye-Fi wireless LAN SD memory cards
♦ Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
♦ This product supports PRINT Image Matching III. PRINT Image Matching enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Some functions are not available on printers that are not PRINT Image Matching III compliant. Copyright 2001 Seiko Epson Corporation. All Rights Reserved. Print Image Matching is a trademark of Seiko Epson Corporation. The PRINT Image Matching logo is a trademark of Seiko Epson Corporation.
♦ Mac OS is a trademark of Apple Inc., registered in the U.S. and other countries.
♦ HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
♦ All other brands or product names are trademarks or registered trademarks of their respective companies.
♦ Design and Specifications are subject to change without notice.